Revision Hallux Valgus Surgery: Causes, Workup, and Treatment Options

ankle8
The need for revision hallux valgus surgery is a problem all surgeons encounter. Revision of a failed hallux valgus surgery is often difficult, and very little research exists and few papers have been presented on the topic. Hallux valgus failure has multiple causes, including reoccurrence, avascular necrosis, malunion, nonunion, and hallux varus. These problems can be difficult to address, although some are far more difficult to correct than others. This article details the underlying causes of hallux valgus failure, the workup, and the revision options, with the hope of providing greater education and research on this difficult problem.

Causes of Hallux Valgus Failure

Hallux valgus failure has a multitude of causes. Too many potential causes exist to be discussed completely in this article, but the most common causes are addressed.

What causes bunion (hallux valgus) recurrence after surgery?

Recurrence of hallux valgus (bunion) after surgical correction is a frustrating scenario for both patient and surgeon, often stemming from inadequate patient or procedure selection, or inappropriate intraoperative technique. Common causes include a preoperative hallux abductus angle greater than 35° and an intermetatarsal angle greater than 15°, insufficient lateral release, poor sesamoid realignment, improper medial capsule repair, inadequate intermetatarsal angle correction, or deficient hardware fixation. Failure to address a hypermobile first ray can also lead to recurrence. Procedures for revisional surgery can be joint-sparing (e.g., another osteotomy, double osteotomy, Lapidus bunionectomy) or joint-destructive (e.g., Keller arthroplasty, first metatarsophalangeal joint fusion), depending on the deformity's severity and arthritic changes. The Lapidus arthrodesis is often used for secondary surgery, especially with a severe intermetatarsal angle or hypermobility, providing stability to the medial column. At University Foot & Ankle Institute, undercorrected intermetatarsal angle or hypermobility of the first ray are the most common findings for recurrence, often addressed with a Lapidus procedure.

Procedures for revisional surgery can be divided into joint-sparing and joint-destructive procedures. If the deformity is still mild to moderate in nature and no severe arthritic changes are present, a joint-sparing procedure may still be an option. The surgeon may consider another osteotomy either distally or proximally, a double osteotomy, or a Lapidus bunionectomy. In any case, capsulotendon rebalancing will most likely also be needed around the first metatarsophalangeal joint. Good results have been found with the use of a scarf osteotomy for revisional bunion surgery. One study demonstrated a mean American Orthopaedic Foot & Ankle Society (AOFAS) score improvement from 59 to 90, with a mean reduction in intermetatarsal angle from 13° to 4° Reoperation with a crescentic osteotomy has also been illustrated in the literature with good long-term outcomes Lim and Huntley describe a 39-year-old woman previously treated with a Chevron osteotomy who presented with recurrence of her hallux valgus deformity. A proximal opening wedge was performed in combination with a short distal scarf osteotomy in which a medial closing wedge was used. Her 3-month postoperative visit showed both adequate clinical and radiographic outcomes.

The Lapidus arthrodesis is a reliable and reproducible procedure that is often used in secondary surgery for hallux valgus correction, especially if a significant amount of distal work has already been performed. The Lapidus procedure is a valid alternative if a severe intermetatarsal angle exists and first metatarsophalangeal joint salvage is desired. The procedure will also address any underlying hypermobility that may have been overlooked initially, and will provide overall stability to the medial column. Ellington and colleagues performed a retrospective review of 32 feet treated with a Lapidus arthrodesis for recurrent hallux valgus with 1-year follow-up. The mean hallux valgus angle decreased from 36.2° preoperatively to 15.3° postoperatively. The intermetatarsal angle also improved significantly from 13.6° to 7.5°, and 87% of patients reported good to excellent results. Coetzee and colleagues also recommend the Lapidus as the preferred procedure for salvage of failed hallux valgus surgery. They conducted a prospective cohort study of 26 feet with previously failed procedures. At 2 years, the mean AOFAS score had increased from 47.6 to 87.9 points. The mean intermetatarsal angle decreased from 18.0° to 8.6°.

Both the Keller arthroplasty and first metatarsophalangeal joint fusion may be preferred procedures for secondary hallux valgus operations. Kitaoka and colleague compared these procedures after failed hallux valgus surgery. Keller arthroplasty was performed on 11 feet, and first metatarsophalangeal joint fusion was performed on 9 feet. The mean age of each group was 63 years. In the resection arthroplasty group, the hallux valgus angle improved an average of 11°, whereas the intermetatarsal angle showed an improvement of 2°.
In comparison, the arthrodesis subset showed a decrease in hallux valgus angle of 23° with an average 2° improvement in intermetatarsal angle. Results were good in 6 of the 11 feet in the arthroplasty group (54.5%) versus 6 of the 9 feet (67.0%) in the fusion group. The outcome of the joint-destructive procedure truly depends on proper patient selection.
Younger, more active patients will have a more favorable result with an arthrodesis procedure. On the contrary, older and more sedentary patients may obtain adequate results with less healing and recovery time if a Keller arthroplasty is performed.

At University Foot & Ankle Institute, the most common finding for reoccurrence is either an undercorrected intermetatarsal angle or hypermobility of the first ray. In most cases, a Lapidus procedure with or without bone graft is undertaken rather than a reosteotomy.
The authors have found that the Lapidus procedure allows proper alignment of the first ray in multiple planes and also allows for correction of length and possible hypermobility issues. Care should be taken when performing a second osteotomy on the first metatarsal because of an increased risk of nonunion, avascular necrosis, and scar formation. Finally, if a McBride-type bunionectomy was performed initially with no osteotomy, a Lapidus or proper osteotomy may be considered to correct the underlying problems.

CALL (855) 557-5400 OR
CLICK HERE TO SCHEDULE ONLINE

What is malunion after bunion (hallux valgus) surgery and how is it treated?

Malunion, one of the most common causes of bunion surgery failure, is typically caused by iatrogenic plantarflexion or dorsiflexion of the first metatarsal, occurring during surgery or postoperatively from early unendorsed weight-bearing. Plantarflexion, if excessive, can lead to sesamoid pain and capsular inflammation, potentially requiring a dorsiflexion osteotomy if conservative measures like cushioned shoes or orthotics fail. More commonly, an elevated first ray (dorsiflexion) causes symptoms like transfer lesions under the second metatarsal head and lateral column overload. This can be managed with orthotics or, if unsuccessful, a plantarflexion osteotomy or Lapidus-type procedure. Proper intraoperative positioning and rigid fixation are crucial to prevent malunion.

More common than plantarflexion of the first ray is elevation. An elevated first ray is commonly symptomatic and results in transfer lesions under the second metatarsal head, lateral column overload from the forefoot varus position, and possible midfoot arthritis of the lesser rays. Dorsiflexion problems may be iatrogenic or related to patient noncompliance. During surgery, the position of the first ray must be checked to ensure the metatarsal is not elevated. Well-designed osteotomies and rigid, stable internal fixation are essential in avoiding dorsiflexion of the first ray during the postoperative period. V-shaped osteotomies tend to be more stable and are therefore able to resist loading stress well compared with less-stable wedge osteotomies. Care should be taken to avoid early weight-bearing, especially in patients in whom risk of dorsiflexion with increased plantar pressure is high. Should dorsal malunion of the first ray occur, an orthotic with a medial forefoot posting can help increase pressure under the first metatarsal region and improve pressure distribution. If this is not successful, plantarflexion of the first metatarsal either with osteotomy or with a Lapidus-type procedure, with or without bone grafting, can be helpful.

What causes hallux varus after bunion surgery and how is it corrected?

Hallux varus, a frequent problem after hallux valgus correction, is primarily iatrogenic, caused by factors such as overstacking of the medial eminence, overly aggressive closure of the intermetatarsal angle, overtightening of the medial capsule, or an aggressive lateral release. Proper intraoperative vigilance, including correct ray positioning, limited lateral release, and balanced capsular tension, is essential for prevention. If hallux varus occurs, initial corrective actions may include strapping. Surgical options range from soft tissue releases and tendon transfers (e.g., extensor hallucis longus, abductor hallucis) to tightrope procedures, reverse shifting osteotomies (e.g., reverse scarf, reverse distal chevron), or, in cases of rigid deformity or arthritis, fusion of the first metatarsophalangeal joint for permanent stability.

Should surgery be necessary, a soft tissue release rarely works but can be attempted as a first-line option during surgery. Plovanich and colleagues conducted a systematic review to assess the integrity of soft tissue reconstruction for flexible iatrogenic hallux varus repair. They found a 16.2% complication rate among all procedures. Transfer of the extensor hallucis longus tendon with fusion of the hallux interphalangeal joint was the only procedure to result in recurrence of the hallux varus with a rate of 4.4%. The other procedures performed included transfers of the abductor hallucis tendon, the first dorsal interosseous tendon, and the extensor hallucis brevis tendon. A tightrope procedure or internal brace technique for reefing of the lateral capsule and ligament structures can help reposition the ray. If the first intermetatarsal angle is dramatically overcorrected, a reverse medially shifting head osteotomy can realign the sesamoid complex and assist in hallux varus correction. One study found positive outcomes in varus correction with a reverse scarf osteotomy combined with opening wedge of the proximal phalanx after scarf/Akin osteotomies in a small subset of patients. Others have suggested a reverse distal chevron osteotomy for cases in which the intermetatarsal angle has been overcorrected. Often the authors will obtain patient consent for several procedures when hallux varus correction is planned. This practice allows each step to be systematically performed during surgery until great toe alignment is rectus. This procedure includes a soft tissue release, capsular release, ligament reefing, and possible metatarsal osteotomy. A fusion of the great toe joint is usually previously planned and not part of the systematic procedure. If the ray is rigidly positioned medially and/or arthritis of the first ray has occurred, a fusion of the first metatarsophalangeal joint can be the best option. Grimes and Coughlin studied the results of first metatarsophalangeal joint fusion after failed surgical correction of hallux valgus and found satisfactory outcomes, including in patients who presented with iatrogenic hallux varus. Other investigators have also recommended fusion for failed hallux valgus surgery, because the influences around the first metatarsophalangeal joint may be unpredictable after an already unsuccessful procedure. First metatarsophalangeal joint arthrodesis assures permanent stability across the joint with little risk of subsequent deformity.

What causes first metatarsal shortening after bunion surgery and how is it addressed?

Iatrogenic shortening of the first metatarsal from osteotomy is a possible complication of hallux valgus surgery, primarily caused by poorly planned procedures (e.g., performing a shortening procedure on an already short metatarsal), poorly performed osteotomies (e.g., not perpendicular to the long axis), or postoperative issues like poor bone quality or fixation failure. Prevention involves proper procedure selection, precise osteotomy technique, and adequate fixation. If shortening occurs, treatment options include lengthening scarf-type osteotomies, bone lengthening with grafts, or, if the pain is due to transfer pressure, shortening osteotomies of the lesser metatarsals. Conservative management with stiff-soled rocker shoes or orthotics can also help.

Poor surgical planning most often results from performing the wrong procedure on an already short first metatarsal. If a short first metatarsal is present, a closing base wedge–type procedure or a Lapidus-type procedure with bone wedge cuts may result in excessive shortening. Potential alternatives include an opening base wedge osteotomy or a Lapidus with joint curettage with or without bone grafting. The use of the proper procedure based on the needs and requirements of each individual patient is essential for adequate outcome prediction.

Iatrogenic intraoperative shortening of the first metatarsal may also occur because of the osteotomy made. It is essential to consider that a head or base osteotomy should be made, at worst, perpendicular to the long axis of the first metatarsal to avoid shortening. A Kirschner wire (K-wire) can be used as an osteotomy guide and checked under fluoroscopic guidance before performing an osteotomy. In a minimally short first metatarsal, the osteotomy should be made to slightly lengthen the capital fragment relative to the long axis of the first metatarsal, which can help increase pressure on the first ray.

Shortening because of bone shift or fixation failure is also a common cause of hallux valgus complication. In an attempt to allow early weight-bearing, some cases may result in failure. The bone quality of each patient must be assessed at the time of surgery. If bone quality is deemed poor, a period of limited or non–weight-bearing can be helpful to avoid shortening of the first metatarsal from compression or bone failure. Furthermore, if fixation is deemed to be poor, a second point of fixation may be added, such as another screw, a plate, K-wire, or an absorbable pin. In the authors’ practice, 2 screws are often placed in distal head osteotomies and 2 screws and a plate are placed on Lapidus bunionectomies to avoid fixation complications.

Should shortening occur, a lengthening scarf-type osteotomy or a bone-lengthening with bone graft may be attempted. Bevilacqua and colleague studied the amount of length obtained with a distraction scarf osteotomy in patients for whom previous bunion correction failed. They documented an increase in length of 7.08%, with a statistically significant increase between preoperative and postoperative measurements. They also described using the distraction scarf osteotomy in conjunction with a Lapidus procedure to maintain length of the metatarsal. This adjunct procedure prevented severe shortening in patients who were noted to have an already shortened first metatarsal preoperatively. If the main source of pain is transfer pressure on the lesser metatarsals, especially the second metatarsal, a shortening osteotomy of the lesser metatarsals may be a better option to compensate for the deranged length of the first metatarsal. Conservative options to help with first metatarsal shortening include stiff-soled rocker-style shoes, such as platforms, clogs, or wedges for women, which avoid the roll and push-off phases of gait and decrease forefoot overload. An orthotic with a metatarsal pad and a cutout under the second metatarsal with or without a Morton extension below the first metatarsal can be helpful to decrease pressure under the lesser metatarsals.

What causes nonunion after bunion (hallux valgus) surgery and how is it treated?

Nonunions, though rare in hallux valgus surgery, can be devastating and result from either technical complications by the surgeon or patient-related issues. Surgeon complications often involve poor osteotomy or joint preparation and inadequate fixation, emphasizing the need for proper site preparation, minimal thermal necrosis, and stable fixation. Patient-related causes include nutritional factors (e.g., low vitamin B or D, poor bone density) and poor compliance with postoperative weight-bearing instructions. If a nonunion occurs, treatment involves checking nutritional and bone density levels, potentially using bone density medications, and surgical care for nonactive nonunions, which may include removal of the nonunion, stable fixation, bone grafting, and revision fusion. Bone stimulators can also be helpful.

A second and less commonly considered cause of nonunion is patient-related issues, such as nutritional factors and/or poor compliance. These issues must be addressed before surgery to avoid postoperative issues. For example, if nutrition issues or potential bone quality and healing issues are considered a possibility, vitamin and bone density levels may need to be determined before surgery. Vitamins B and D are essential for proper healing. A low bone density level may result in poor bone healing and should be addressed with medication before surgery. Finally, patient compliance with weight-bearing status is critical to healing. Patients must be educated and instructed regarding the essential factors associated with non–weight-bearing and the potential for nonunion.

If the unfortunate scenario of a nonunion occurs, nutritional, bone density, and vitamin levels should be checked. Several bone density medications may be helpful in increasing bone healing. A bone scan can also help determine whether the nonunion is active or nonactive. A nonactive nonunion requires surgical care, because the region does not have good blood supply for healing. In these cases, removal of the nonunion, stable fixation, and possible bone grafting in an optimized patient can result in revision fusion. Hamilton and colleagues16 conducted a multicenter retrospective study to evaluate the rate of union after revisional Lapidus for previously failed unions. Of the 17 feet receiving a bone-block Lapidus arthrodesis with autogenous bone grafting, 14 feet demonstrated successful union. Of particular interest, all 3 failed revisions were in patients who were active smokers. A bone stimulator may also be helpful to add to the mix of a nonunion with or without revision surgery.

What causes avascular necrosis after bunion (hallux valgus) surgery and how is it treated?

Avascular necrosis, a rare complication of hallux valgus surgery, often has an unknown cause, but several surgical factors can help avoid its risks. These include limiting periosteal dissection and bone stripping, thoroughly understanding and protecting the vascular supply to the first ray, and ensuring proper internal fixation with stable bone constructs. Studies suggest certain osteotomy types, like the Chevron, may carry a higher risk compared to others, such as a long dorsal arm osteotomy. If avascular necrosis occurs, it is usually limited and can often be reversed with a bone stimulator and non–weight-bearing in early cases. For progressive changes, bone resection, bone grafting, and fusion may be necessary, potentially requiring a bone block arthrodesis to maintain length.

Should avascular necrosis occur, it is usually limited and can be reversed with the use of a bone stimulator. Non–weight-bearing may also help in early cases. If avascular changes progress, bone resection, bone grafting, and fusion may be necessary. If a large amount of resection is required to remove all devitalized bone, a bone block arthrodesis is most likely required to maintain length and avoid transfer metatarsalgia.

Key Takeaways for Preventing and Addressing Failed Bunion (Hallux Valgus) Surgery

To prevent and address failed bunion (hallux valgus) surgery, proper planning, optimal surgical care, and diligent patient protection are critical. This includes a thorough medical workup, the patient's understanding of the postoperative course, and the surgeon's selection of a suitable, individualized procedure based on factors like hypermobility, ray length, toe position, and cartilage alignment. Surgical execution must protect vascular and nutritional supply, ensure proper first ray positioning and stable fixation, and address soft tissue balancing. Postoperatively, the foot requires proper protection according to surgeon's instructions. While failure is an occasional risk, adherence to these principles can significantly mitigate complications.

To limit the risks associated with hallux valgus complications, proper planning is critical. Appropriate medical workup must be obtained, and the patient must have a solid understanding of the postoperative course. The surgeon must choose a suitable procedure for the associated hallux valgus deformity. The idea of one procedure being ideal for all patients must be abandoned. Hypermobility, ray length, toe position, and cartilage alignment/tracking must be assessed for proper procedure selection. The surgery must be performed with care to protect the vascular and nutritional supply to the surgical site. The first ray must be positioned properly and fixated with adequate stability. Soft tissue balancing also must be addressed before closure of the wounds. After surgery, the foot must be protected properly, through both the surgeon’s instructions and the patient’s protection of the region.

With proper planning, optimal surgical care, and patient protection, many of the issues associated with hallux valgus failure can be avoided. The hope is that the information provided in this article will serve as a template and starting point for patient care considerations related to hallux valgus surgery.

CALL (855) 557-5400 OR
CLICK HERE TO SCHEDULE ONLINE

References

  • Austin DW, Leventen ED. A new osteotomy for hallux valgus. Clin Orthop. 1981;157:25–30
  • Lagaay PM, Hamilton GA, Ford LA, et al. Rates of revision surgery using Chevron-Austin osteotomies, Lapidus arthrodesis and closing base wedge osteotomies for correction of hallux valgus deformity. J Foot Ankle Surg. 2008;47:267–272
  • Belczyk R, Stapleton JJ, Grossman JP, et al. Complications and revisional hallux valgus surgery. Clin Podiatr Med Surg. 2009;26:475–484
  • Okuda R, Kinoshita M, Yasuda T, et al. The shape of the lateral edge of the first metatarsal head as a risk factor for recurrence of hallux valgus. J Bone Joint Surg. 2007;89:2163–2172
  • Lyons MC, Terol C, Visser J, et al. Recurrent hallux valgus: treatment considerations. Podiatry Institute Update. 2009;26:169–173
  • Bock P, Lanz U, Kröner A, et al. The Scarf osteotomy: a salvage procedure for recurrent hallux valgus in selected cases. Clin Orthop Relat Res. 2010;468:2177–2187
  • Lim JB, Huntley JS. Revisional surgery for hallux valgus with serial osteotomies at two levels. ScientificWorldJournal. 2011;11:657–661
  • Ellington JK, Myerson MS, Coetzee JC, et al. The use of the Lapidus procedure for recurrent hallux valgus. Foot Ankle Int. 2011;32:674–680
  • Coetzee JC, Resig SG, Kuskowski M, et al. The Lapidus procedure as salvage after failed surgical treatment of hallux valgus: a prospective cohort study. J Bone Joint Surg Am. 2003;85A:60–65
  • Kitaoka HB, Patzer GL. Arthrodesis versus resection arthroplasty for failed hallux valgus operations. Clin Orthop Relat Res. 1998;347:208–214
  • Plovanich EJ, Donnenwerth MP, Abicht BP, et al. Failure after soft-tissue release with tendon transfer for flexible iatrogenic hallux varus: a systematic review. J Foot Ankle Surg. 2012;51:195–197
  • Kannegieter E, Kilmartin TE. The combined reverse scarf and opening wedge osteotomy of the proximal phalanx for the treatment of iatrogenic hallux varus. Foot (Edinb). 2011;21:88–91
  • Lee KT, Park YU, Young KW, et al. Reverse distal chevron osteotomy to treat iatrogenic hallux varus after overcorrection of the intermetatarsal 1-2 angle: a technique tip. Foot Ankle Int. 2011;32(1):89–91
  • Grimes JS, Coughlin MJ. First metatarsophalangeal joint arthrodesis as a treatment for failed hallux valgus surgery. Foot Ankle Int. 2006;27(11):887–893
  • Bevilacqua NJ, Rogers LC, Wrobel JS, et al. Restoration and preservation of first metatarsal length using the distraction scarf osteotomy. J Foot Ankle Surg. 2008;47(2):96–102
  • Hamilton GA, Mullins S, Schuberth JM, et al. Revision Lapidus arthrodesis: rate of union in 17 cases. J Foot Ankle Surg. 2007;46(6):447–450
  • Weinraub GM, Meberg R, Steinberg JS. Vascular perfusion of the long dorsal arm versus chevron osteotomy: a cadaveric injection study. J Foot Ankle Surg. 2004;43(4):221–224

Visited 4 times, 1 visit(s) today
Dr. Bob Baravarian

Written by Dr. Bob Baravarian

Dr. Bob Baravarian DPM, FACFAS is a Board-Certified Podiatric Foot and Ankle Specialist. He is Chief of Foot and Ankle Surgery at Providence St. John’s Medical Center and a past Chief of Foot and Ankle Surgery at Santa Monica-UCLA Medical Center and Orthopedic Hospital. Dr. Bob is the founding editor of the international journal Foot and Ankle Specialist and is a regular contributor to Podiatry Today and numerous medical publications and journals. He is currently the director of foot and ankle services at Docs Foot and Ankle in Los Angeles.

Patient’s Talk About Dr. Bob's Quality of Care
4.8
5,220 TOTAL 1ST PARTY REVIEWS / OUT OF 5 STARS

Dr. Baravarian is so great! I had an injury to my left foot. He took x-rays and provided me with a boot! I feel like a whole new person! Now I can run again with no pain!🏃‍♀️ I recommend you to go him for any foot and ankle issues.🦶

Dr. Baravarian is absolutely an incredible doctor. He is very experienced and I am so grateful that I found him! I had 2 PRP procedures done on my ankle and didn’t feel much pain! It’s wonderful to find a doctor that is trustworthy!

My experience with Dr B was amazing.I had zero pain alter my surgery. Everything is healing so well. He is the best!

Dr. Bavarian was great. He said i didn’t need to remove part of my nail…the infection would subside. Very honest. Staff was great, kind. Irtually no wait. I recommend highly.

Dr Bob is the best! I have needed this bunion surgery for years, and when I met Dr. Bob I felt 100 percent confident he was the right Dr. to correct my bunion! I have completed the right foot and will be doing the left foot in a couple weeks! Thanks to Dr Bob I will be able to be super active and no longer have pain! I am so grateful to him. Rachael H

He is excellent. Highly recommended

I love there staff super nice and friendly and when you meet the doctor is to die for😁super friendly and he explains everything clearly and makes sure you understand everything before he leaves the room doesn’t rush you at all

I was able to get an appointment the next day after dislocating my toe. I had a great experience. The staff were friendly and the doctor answered all my questions.

This is a first class experience with a world-leading research surgeon. If "good enough" isn't good enough for you, this is where you want to go.

Great service. Very attentive. Even took us early.

I have been so impressed with Dr. Bob. Ive never sat in the waiting room one minute longer than my appointment time. That’s a real plus. More importantly is his honest, professional approach to his craft and his commitment to my recovery. He’s the best and I highly recommend him.

Dr. Baravarian is incredible! After three podiatrists and a failed surgery left me with no answers for my feet pain, Dr. Baravarian figured out the real cause of the pain in the first visit.I was ready for another surgery to fix the first one, but he held off until the root issue was treated. My hammer toe and bunion surgery went perfectly—I was amazed to have no pain afterward! Dr. Baravarian is super knowledgeable and explained everything about the surgery and recovery clearly, making me feel informed and at ease. I also want to extend my gratitude to his staff, who were incredibly kind and supportive throughout my treatment.

Prompt professional service as always!

dr baravarian is an excellent dr. he diagnosed my issue, prescribed the perfect remedy and his treatment has allowed me to resume all my activities. he saw me on time and his office staff is also very good

I highly recommend Dr. Baravarian. From checking in at the front desk to the doctors diagnosis everything went smoothly and diagnosis was good. After care instructions were explained well.

Great experience Everyone was very nice and efficient Thank you so much

Professional, courteous, and efficient

I consider him a knowledgeable and experienced Ankel specialist. I chose him as my foot doctor and continue to receive treatment. I decided to give him a 5 star rating.

Quick and easy

Only the best! Dr. Baravarian is so good and kind! I highly recommend him!

See all of Dr. Bob’s Reviews

Frequently Asked Questions

1 Why might a bunion come back after previous surgery?

The meta description indicates that hallux valgus can recur after procedures like Chevron osteotomy. Factors contributing to reoperation rates and the recurrence of the deformity often involve specific deformity angles.

2 What is revision hallux valgus surgery?

Revision hallux valgus surgery addresses the recurrence or persistence of a bunion deformity after a previous bunion operation. This type of surgery aims to correct the issues that led to the initial surgery's failure or the return of the bunion.

3 What are common reasons for needing revision bunion surgery?

Common reasons for needing revision bunion surgery include the recurrence of the bunion deformity, malunion, or other post-operative complications. These issues can lead to persistent pain or functional problems, requiring further surgical intervention.

4 Can metal-free techniques be used for revision bunion surgery?

The practice offers "Revision Toe Surgery" and utilizes "Metal-Free Ghost Surgery System" and "Metal-Free Foot and Ankle Surgery with OSSIOfiber®" as treatments. These advanced techniques are designed to integrate into the bone without leaving permanent hardware.

Scroll to Top